How Much Does Mold Remediation Cost in Austin, TX?

Most mold remediation jobs in Austin homes run $2,500 to $5,000 for a single contained area, such as a closet, a bathroom vanity wall or one room. The price covers containment, removal of affected drywall, cleaning and preparation for clearance testing. It does not cover the independent mold assessment, the clearance test or the rebuild.

Call 512-215-8001 Estimate my job

Price ranges by job type

These are the ranges Texas Restoration Group sees on Austin-area homes. Every job is priced as an estimate from the scope, so use these as a planning guide.

Job Typical range What changes it
Small closet (our minimum job) $2,500 to $3,500 Whether a dehumidifier and air scrubber are needed
Bathroom vanity or under-sink wall $3,500 to $5,000 The vanity has to be detached and the plumbing disconnected to reach the drywall. A badly affected vanity is disposed of.
Single room with drywall removal $2,500 to $4,000 per room Exterior walls add insulation removal. Plumbing walls can pull the adjoining room into the work area.
Several rooms $2,500 to $4,000 per area How high the drywall is cut in each room, and whether every affected room is known before work starts
Attic $1,000 to $2,000 per day, typically 3 to 7 days The type of cleaning needed and how much framing can be reached. Attics are unconditioned space, so containment is lighter.
Crawl space Priced after inspection, higher than an attic Tight working space and heavier protective equipment for the crew

Online calculators quote Austin mold remediation at $10 to $19 per square foot. Square footage alone misleads on small jobs. Containment, a decontamination chamber and air filtration cost about the same to set up for 10 square feet as for 40, which is why a small closet does not cost a few hundred dollars.

Estimate your job

What the price includes

Mold remediation is not handyman work. The equipment and the sequence exist to keep spores from spreading through the rest of the house while affected material comes out.

A typical job includes:

What it does not include

Item Who handles it
Mold assessment, sampling and protocol An independent licensed mold assessor, paid separately
Clearance testing and report The same assessor, as an additional charge
Rebuild (drywall, texture, paint, cabinets) Estimated separately once the walls are open and the extent is known
Plumbing repair A plumbing company. We can refer one we work with.
HVAC removal and reinstall A licensed HVAC company puts the cleaned system back when it had to come out

Why you get an estimate, not a quote

Nobody knows the full extent of mold until the wall is open. We write estimates, and we tell you as soon as the scope changes.

We price from our own price list using three things together: the equipment on site, the time on the job and the square footage affected.

What most often moves the price:

  1. Hidden growth. Mold that extends past the area originally assessed means more material to remove and clean.
  2. Equipment days. Equipment is charged by the day. A dehumidifier estimated for 3 days that has to run 6 or 7 roughly doubles that line.
  3. Wall type. Exterior walls carry insulation that has to come out. Interior plumbing walls can mean working from both sides.
  4. Fixtures in the way. Vanities, cabinets and HVAC equipment that must be removed to reach the growth.
  5. An unfixed moisture source. If the leak is still active, the area will not dry and the mold will return.

How mold work is done in Texas, and who you pay

Texas separates the company that assesses mold from the company that removes it. Texas Restoration Group is a licensed mold remediation contractor (TDLR MRC1801). We remove the affected material and clean the area. We do not perform mold assessments. Because we hold a state license, we work from an assessor's protocol on every job, whatever its size.

  1. Assessment. A licensed mold assessor inspects and, if needed, takes samples.
  2. Protocol. If remediation is required, the assessor writes a protocol stating what must be removed, how, and the criteria for passing.
  3. Remediation. We follow the protocol. This is the price covered on this page.
  4. Clearance. The assessor returns, takes samples and issues a clearance report once the area passes.
  5. Certificate. You receive a Certificate of Mold Damage Remediation, which you can give to a future buyer or your insurer.

What the assessor charges

Assessors are independent businesses and set their own prices, so we do not quote their fees. Ask each one what the price includes:

More on the rules: Texas Department of Licensing and Regulation mold program.

Does insurance pay for mold remediation?

Usually not. Most of our mold jobs are paid directly by the homeowner. Many Texas homeowner policies exclude mold or limit it to a small amount, and coverage depends on your policy and on what caused the moisture.

Call your agent and ask two questions before work starts: whether your policy has mold coverage, and what the limit is. We provide the estimate, photos and documentation your carrier asks for, but the coverage decision is theirs.

Payment terms

Mold jobs are billed in three stages against the estimate.

Stage Amount
Deposit before work starts 50% of the estimate
Work complete and ready for testing 30% of the estimate
After clearance is obtained The balance

The balance is 20% when the scope does not change. It is lower if the final scope comes in under the estimate and higher if hidden growth adds work.

How long it takes

Plan on 4 to 7 days from the start of work until the area is ready for clearance testing. That is the part we control.

After that, three things outside our control set the finish date:

Frequently asked questions

What is the minimum cost for mold remediation in Austin?

Our minimum job, usually a small closet, runs $2,500 to $3,500. That covers containment, a decontamination chamber, drywall removal, cleaning and preparation for clearance.

Why does a small area cost so much?

The setup is the same regardless of size. Containment, the decontamination chamber and air filtration are what keep spores out of the rest of the house.

Is the rebuild included?

No. Rebuild is estimated separately after the walls are open, because the extent is unknown until then.

Do I need a mold assessor before calling a remediation company?

You can call us first, but the assessor's protocol has to be in place before we start. As a licensed remediation contractor we work from a protocol on every job. We can refer assessors we have worked with.

How long does a job take?

Plan on 4 to 7 days until the area is ready for clearance testing. The assessor's schedule and lab turnaround, usually 24 to 72 hours, come after that. Rebuild is a separate timeline.

Can I clean the mold myself?

Surface mold on a hard, non-porous surface can often be cleaned by a homeowner. Mold in drywall means the material has to be removed under containment, or the spores spread.

Call 512-215-8001 Estimate my job